Skip to content

Victory Unitized CNC System

This fully integrated industrial Unitized CNC plasma system features a Hypertherm EDGE Connect TC controller paired with your choice of Hypertherm’s conventional Powermax125 or MAXPRO200 plasma cutters or HyPerformance HPR or X-Definition XPR plasma cutters.

The Victory Unitized CNC plasma system is available in any size from 5’ x 10’ to 8’ x 20’ in either water table or down draft configurations. The work table has a structural double frame with a welded 3/16” walled tub built on a W4x13 frame to withstand the hazards of the industrial environment. Heavy ‘T’ guide rails, helical gear rack with 2” steel rollers on the rail axis combined with dual linear slides on the cross axis make a smooth and accurate guide system.

The motion drive system consists of three 400-watt fully synchronized brushless Yaskawa AC servo motors riding on pneumatic pre-loaders which drive direct-coupled precision gearboxes. One 400-watt and two 750-watt servos are used on systems 8′ wide.

All Victory-Hypertherm systems use only Hypertherm software.

Systems start at $168,600 with MAXPRO200.

Work Table

3/16” walls
W4x13 frame
Water or downdraft
Infinitely adjustable water level

Gantry

Fabricated steel with dual 25mm linear guides running on unitized ‘T’ rails

Gear Rack

.75 x 1” helical teeth

Controller & Drives

Hypertherm EDGE Connect TC controller w/19″ touch screen
Joy stick with soft & hard buttons
Quad-core processor
3 X 400 watt Yaskawa brushless AC servos on systems less than 8’ wide
2 X 750 watt & 1 X 400 watt Yaskawa brushless AC servos on systems 8’ wide and wider
Three emergency stops with EtherCAT communication
Direct drive planetary gear boxes

Hypertherm Software

Phoenix CNC cutting software
64-part shape library
Cutting charts
ProNest® CNC
Optional ProNest® office PC
Optional True Hole® (requires HyPerformance plasma & AutoGas)
Plasma Marking (requires ProNest® & Autogas)

Power Chain

11” IGUS (fully-enclosed)

Standard Features

Integrated automatic torch height control
Torch collision protection
Hypertherm Phoenix CNC
ProNest® and oxy-fuel software

Plasma Options

MAXPRO200
HPR400
XPR 170 or 300

Equipment Options

Pronest® PC with True Hole® (True Hole® requires HyDef or X-Definition plasma with Auto Gas Control)
ProNest® Office PC
1 x CNC oxy-fuel torch
3/4 HP CNC drill
SnapLoc straight-line bevel